Cobra Electronics 25 WX NW ST specifications RF Meter, Transmit, External Speaker

25 WX NW ST Manual 3.3 6/15/99 1:10 PM Page 18

Operation

To Transmit To Transmit

RF Meter

This meter swings proportionately to the RF output (outgoing signal) while transmitting.

Operation

RF Meter

Caution!

Be sure the antenna is properly connected to the radio before transmitting. Prolonged trans- mitting without an antenna,or a poorly matched antenna, could cause damage to the transmitter.

Be sure to read the F.C.C. Rules and Regulations included with this unit before transmitting.

Transmit

1Select desired channel.

Transmit

1Push and hold mic button to transmit. Transmitter is now activated. When transmit- ting, hold the microphone two inches from your mouth and speak in a clear, normal voice. Release to receive.

External Speaker

The external Speaker jack is used for remote receiver monitoring.

1Connect an external speaker to the external speaker jack on the rear panel.

External Speaker

Note

The external speaker should have 8-ohm impedance and be rated to handle at least 4.0 watts. When the external speak- er is plugged in,the internal speaker is automatically discon- nected.

Note

Cobra external speakers are rated at 10 watts.See Accessories page 39.

18

19