Sanyo RCS-SH80UG, TM-SH80UG, SHA-KC64UG, RCS-SH80UA instruction manual Care and Cleaning continued

Care and Cleaning (continued)

How to remove the filter
(continued)
	4.	Remove the air filter attached to the air intake grille.
		Latch
		Safety chain
Air intake		Air filter
grille
		Bolt screw
How to remove the filter
(continued)
Ceiling-mounted type (T):	1.	Remove the bolt screws on the finger-hold using a screw driver. (After
		cleaning, be sure to attach the two bolt screws.)
	2.	Take hold of the finger-hold on the air intake grille and slide it to the rear,
		and the grille will open downward.
	3.	Take hold of the finger-hold on the air filter, first lift it and then pull it
		toward you to release it from the catch.

Finger-hold	Catch
Air filter

1	Air filter finger-hold	Air intake grille
Wall-mounted type (K):	1. Move the flap on the air outlet grille to its lowest position with the remote
	control unit.

2.The filter is disengaged by pushing the tab up gently. Hold the air filter by the tab at the bottom, and pull downward.

1 Push up then

2Pull down

Air filter $

When replacing the filter, make sure that the FRONT mark is facing you.

Push it up until you hear it click back into position.

1 - 16 OI-432-01 - 16EG