Sanyo RCS-SH80UA, TM-SH80UG, SHA-KC64UG, RCS-SH80UG Using the Wireless Remote Controller

Using the Wireless Remote

Controller

How to Install Batteries	1.	Press and slide the lid on the back of the wireless remote controller in the
		direction of the arrow.
	2.	Install two AAA alkaline batteries (LR03). Make sure the batteries point in
		the direction marked in the battery compartment.
	3.	Press the ACL button, then replace the lid. If you press it, the current
		time, ON time, and OFF time are all reset to 0:00.

ACL button

•The batteries last about six months, depending on how much you use the wireless remote controller.

Replace the batteries when the wireless remote controller’s lamp fails to light, or when the wireless remote controller cannot be used to change the air conditioner’s setting.

•Use two fresh leak-proof type-AAA alkaline batteries (LR03).

•In replacing batteries, follow the instructions as mentioned in the sub-section ‘‘How to Install Batteries’’.

•If you do not use the wireless remote controller more than 1 month, take out the batteries.

2

OI-404-02 - 7EG 2 - 7