Indoor unit
30˚
Zone
“A” 60˚ for
cooling
Zone “B” for heating
Adjusting the Airflow Direction (continued)
■Wall mounted type (K)
A. Vertical directions (automatic)
Confirm that the remote control unit has been turned on. Press the FLAP button to start the flap moving up and down. If you want to stop the
flap movement and to direct the air in the desired direction, press the FLAP button again. In the cool mode, don’t direct the flap down more than 30°, otherwise, condensation may drip on to the floor. Zone “A” is the recommended flap position for cooling.
Do not move the flap with your hands.
B. Horizontal directions (manual)
The horizontal airflow can be adjusted manually by moving the vertical vanes to the left or right.
Left |
| Up |
| Flap | |
Right | Air outlet | |
Vertical | Down | |
vanes | grille |
■Concealed duct type (U)
This air conditioner is not equipped with air outlet parts. These must be obtained locally. Please refer to the manual of the locally adopted air
outlet parts.
1
1 - 11 |