Operation
13
Operation
12
Note
Thereading will be slightly
higheron Channels 1 and 40
comparedto Channel 20.
Note
Whenswitched to SWR position
themeter needle should ideally
beas far to the left as possible.
Anythingover 3 is not
acceptable.Theantenna
indicatorwill light. A slight
antennaheight adjustment
(higheror lower) may be
required.Repeat relcalibration
steps.
Repeatthe same steps two through five
onChannel 1 and 40. This will check SWR for
allchannels.
6
Whilestill holding down the mic button, set
theS/RF SWR CAL switch to the SWR position,
toread the SWR reading.
5
Rotatethe On/OffVolume knob clockwise
thegreen RX/T X LED will be illuminated.

ToReceive

1
To Receive