Mounting
Installation
Mounting
•
To Mount Your Inverter:
1.Place the inverter on a flat surface with the mounting bracket against the mounting surface.
Mounting Brackets
2.Mount to secure surface using mounting hardware that is corrosion resistant (not included).
Mounting Hardware
The inverter can be mounted horizontally or vertically.
6 English
Connecting Cables
Installation
Connecting Cables
•
Power wire and wiring are very important to the performance of the inverter. Because the inverter has a low voltage, high current input, low resistance wiring is essential between the battery and inverter. This is so it can deliver the maximum amount of energy to the load.
Only use the cables provided with your power inverter.
To Connect the Cables Between the Inverter and the Battery:
1.Turn the On/Off Switch on the inverter to the Off position. If the power source is a DC power supply, switch it Off as well.
On/Off Switch to Off
2.Connect cable to the Power Input Terminals on right side panel of the inverter. The red terminal is positive (+) and the black terminal is negative
Connect Cables
Continued…
Nothing comes close to a Cobra™ 7
