Mode Functions

Operation

6.Choose one of the following:

a.Press the Channel Up or Channel Down button to select a CTCSS privacy code (01 through 38) for the channel.

b.Press the Lock/Enter button to switch from CTCSS to DCS. The DCS icon and privacy code numbers will flash on the display. The Channel Up or Channel Down button can then be used to select a DCS privacy code (01 through 104) for the channel.

If “OFF” flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS

or DCS) system. Press the Channel Up or Channel Down button to cancel the opposite code and select a privacy code from the active system for the selected channel.

7.Choose one of the following:

a.Press the Lock/Enter button to enter the channel/privacy code in the selected memory location. Radio then proceeds to next memory location, which will blink.

b.Press the Mode button to

enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

c.Press the Talk button to enter the channel/privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the radio will enter Standby mode on the channel/privacy code just entered.

14English

Introduction

Mode Button

Memory Icon

Channel Button

 

Customer Assistance

 

Warranty

 

Operation

 

 

To recall a stored memory channel location:

1.Press the Mode button until the Memory icon

and the memory location number flash on the display.

2.Press the Channel Up or Channel Down button to select a memory location

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Talk button to return to Standby

mode on the selected memory location.

A memory location can be reprogrammed at any time it is displayed. Press the Lock/Enter button to begin.

While recalling a stored memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

Nothing Comes Close to a Cobra® 15

Page 10
Image 10
Cobra Electronics CXR825C Choose one of the following, Press the Mode button to, While recalling a stored memory location