Cobra Electronics CXR925C NOAA* All Hazards Radio Channels, Voice Activated Transmit VOX

Mode Functions

Operation

NOAA* All Hazards Radio Channels	•
You can use your microTALK® radio to listen to NOAA All Hazards
Radio channels transmitting in your area.

Introduction	Operation	Customer Assistance	Warranty
Voice Activated Transmit (VOX)				•
In VOX mode, your microTALK® radio can be used “hands-free,”
automatically transmitting when you speak. You can set the VOX

Mode Button

Hazards Radio Icon

Channel Button

To listen to All Hazards Radio channels:

1.Press the Mode button until the WX (All Hazards Radio) icon, the currently selected All Hazards Radio channel, and signal strength are displayed.

2.Use the Channel Up or Channel Down button to change All Hazards Radio channels.

3.WX (All Hazards Radio) icon will continue to be displayed when All Hazards Radio is on. Choose one of the following:

a.Press the Mode button to proceed to other functions.

b.Press the Lock/Enter button to exit All Hazards Radio channels mode and return to Standby mode.

sensitivity level to fit the volume of your voice and avoid transmissions
triggered by background noise.
Mode Button	To turn VOX mode on or off:
	1.	Press the Mode button until the VOX icon flashes
		on the display. The current on or
		off setting is displayed.
	2.	Press the Channel Up or Channel Down button
VOX Icon		to turn VOX on or off.

	3. Choose one of the following:
	a. Press the Mode button to enter the selected
	on or off setting and proceed
Channel Button	to other functions.
	b. Press the Lock/Enter button to enter
	the selected on or off setting and return
	to Standby mode.

*National Oceanographic and Atmospheric Administration

12English

To set VOX sensitivity:

1. Press the Mode button until the VOX icon flashes

VOX Sensitivity Level and the current sensitivity level is displayed.

The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01

being the least sensitive level.

2.Press the Channel Up or Channel Down button to change the setting.

3.Choose one of the following:

a.Press the Mode button to enter the selected setting and proceed to other functions.

b.Press the Lock/Enter button to enter the selected setting and return to Standby mode.

Nothing Comes Close to a Cobra® 13