Mode Functions

 

Operation

 

10 Memory Locations

Your microTALK® radio has 10 Memory Locations for storing

 

your most frequently used channels and channel/privacy code

 

combinations. These Memory Locations can be selected individually or

 

can be scanned. (See page 22 for memory location scan.)

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

6. Choose one of the following:

a. Press the Channel Up or Channel Down

button to select a CTCSS privacy code

(01 through 38) for the channel.

b. Press the Lock/Enter button to

Mode Button

Memory Icon

Channel Button

Lock/Enter Button

To program a memory location:

1.Press the Mode button until the Memory icon and the memory location flash on the display.

2.Press the Channel Up or Channel Down button to select the memory location

(0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button to enter

a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select a channel (1 through 22).

5.Press the Lock/Enter button. The CTCSS icon and privacy code numbers will flash on the display.

switch from CTCSS to DCS. The DCS

icon and privacy code numbers will

flash on the display. The Channel Up

or Channel Down button can then be

used to select a DCS privacy code

(01 through 104) for the channel.

If “OFF” flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS

or DCS) system. Press the Channel Up or Channel Down button to cancel

the opposite code and select a privacy code from the active system for the selected channel.

7.Choose one of the following:

a.Press the Lock/Enter button to enter the channel/privacy code in the selected memory location. Radio then proceeds to next Memory location, which will blink.

b.Press the Mode button to

enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/ privacy code displayed

before you entered mode functions.

c.Press the Talk button to enter the channel/ privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the

radio will enter Standby mode on the channel/ privacy code just entered.

14English

Nothing Comes Close to a Cobra® 15

Page 10
Image 10
Cobra Electronics CXR925C owner manual Memory Locations