Cobra Electronics CXT225 Mode Functions, Set DCS Privacy Codes, Voice Activated Transmit VOX

2. Press using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance.

3. When DCS privacy code is displayed, choose one of the following: a. Press the Mode/Power button to enter the new setting and

proceed to other functions.

b. Press the Lock button to enter the new setting and return to Standby mode.

c. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.

NOAA* All Hazards Radio Channels

•

You can use your microTALK radio to listen to NOAA All Hazards Radio channels transmitting in your area.

Mode Functions

Operation

Set DCS Privacy Codes

•

Mode/Lock Button	To select a DCS privacy code:
	1. After selecting a channel, press the Mode/Power
	button until the DCS icon appears and the small
	numbers flash on the display (01 through 83).

Introduction Operation Customer Assistance Warranty

Voice Activated Transmit (VOX)

•

In VOX mode, your microTALK® radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Mode/Power To turn VOX mode on or off:

DCS PrivacyCode

Channel Buttons

If CTCSS is turned on at the channel selected, the display will flash the DCS icon and “OFF.” To switch from CTCSS to DCS, press the Channel Up or Channel Down button while the display is flashing “OFF.” The display will then show the small numbers flashing and you will then be able to proceed to step 2.

1. Press the Mode/Power button until the VOX icon

flashes on the display. The current On or Off

setting is displayed.

VOX Icon	2. Press the Channel Up or Channel Down
	button to turn VOX On or Off.
	3. Choose one of the following:
	a. Press the Mode/Power button to enter the
	selected On or Off setting and proceed
Channel Button	to other functions.
	b. Press the Lock button to enter the selected On
	or Off setting and return to Standby mode.

Mode/Power

VOX Sensitivity Level

To set VOX sensitivity:

1.Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is displayed.

The current VOX sensitivity level is displayed with letters “LE” and a Number 1 through 5, with Number 5 being the most sensitive level and Number 1 being the least sensitive level.

Mode/Power	To listen to All Hazards Radio channels:
	1.	Press the Mode button until the All Hazards
		Radio icon and the currently selected All Hazards
		Radio channel are displayed.
Hazards Radio Icon	2.	Use the Channel Up or Channel Down
		button to change All Hazards Radio channels.
	3.	The All Hazards Radio icon will continue to
		be displayed when All Hazards Radio is on.
Channel Buttons		Choose one of the following:
		a. Press Mode button to proceed to other functions.
		b. Press the Lock button to exit All Hazards Radio
		channel mode and return to Standby mode.
		*National Oceanographic and Atmospheric Administration

Channel Button

2.Press the Channel Up or Channel Down button to change the setting.

3.Choose one of the following:

a.Press the Mode/Power button to enter the selected setting and proceed to other functions.

b.Press the Lock button to enter the selected setting and return to Standby mode.

8 Nothing Comes Close to a Cobra® 9