Sharp AR-FX9 manual Adding a original to polling memory, Deleting originals from polling memory

SPECIAL FUNCTIONS

Adding a original to polling memory:

Use this procedure to add an original to another original that has already been scanned into polling memory. Place the original in the SPF/RSPF or on the document glass and follow the steps below.

Deleting originals from polling memory:

Follow the steps below to delete originals that have been scanned into polling memory.

1 Press the [MENU] key.

1,2,3,

1,2,3,

1 Press the [MENU] key.

1,2,3,

1,2,3,

2 Press the [] key ( ) or [] key ( ) until "7:MEMORY POLL MODE" appears, and then press the [OK] key.

Selection

"7:MEMORY POLL MODE"

3 Press the [] key ( ) or [] key ( ) until "1:SET" appears, and then press the [OK] key.

Selection

"1:SET"

4 Press the [] key ( ) or [] key ( ) to select the number of times polling transmission will take place and press the [OK] key.

	"1:1.TIME" or
	"2:REPEAT" can be
	selected as the number
1,2,3,	of polling operations
1,2,3,
	allowed.

2	Press the [	] key (	) or [	] key (	)
	until "7:MEMORY POLL MODE"
	appears, and then press the [OK] key.
Selection
"7:MEMORY POLL MODE"
3	Press the [	] key (	) or [	] key (	)

until "2:CLEAR" appears, and then press the [OK] key.

Selection	5
"2:CLEAR"

4 Press the [START] key ( ).

5 Press the [START] key ( ).

75