Sharp AR-FX9 Transmission Reservation, Adjust the resolution and/or contrast settings if desired

TRANSMISSION RESERVATION

When your fax is busy receiving an original or transmitting an original from memory, you can "reserve" a transmission by setting the original (either in the SPF/RSPF or on the document glass), reading it into memory, and entering the fax number. Once the current operation is completed, your fax will automatically dial the number and transmit the original saving you from having to wait.

When Using the SPF/RSPF: When placing the Original on the Table:

1 Confirm that there are no originals on the document glass and that copying is not in progress, then gently close the SPF/RSPF.

2 Adjust the original guides to the width of your original.

3 Place the original face up and push it

gently into the SPF/RSPF. The top edge of the original should enter the fax first.

1 Confirm that there are no original(s) in the SPF/RSPF, and open the SPF/RSPF.

2 Place the original face down on the document glass. Align the original according to the original scale in the illustration below. (Line up the center of the edge of the original with the

( ) mark.)

Original scale

mark

3

Original face up

Adjust the resolution and/or contrast settings if desired.

Gently close the SPF/RSPF.

5

4 Enter the number of the receiving machine using one of the following methods:

•Press a Rapid key.

If you press a Rapid Key, the next step is not necessary.

The number will be dialed once the current operation is completed, and transmission will begin once the connection is made.

•Press the [SPEED/SEARCH] key and enter a Speed Dial number.

•Enter a full number with the numeric keys.

5 Press the [START] key ( ) if you entered a Speed Dial number or a full number.

•The number will be dialed once the current operation is completed, and transmission will begin once the connection is made.

Note	When using the document glass, do not set
	original(s) in the SPF/RSPF.

4 If needed, set the original size, resolution, and contrast. (See "DIALING AND TRANSMITTING" (p.58))

5 Press the [START] key ( ) to scan the page into memory. If you have more than one original to read into memory, place the next page, and press the [START] key ( ) to read each page.

6 Press the # key ( ).

69