Sharp AR-FX9 manual Storing Numbers for Automatic Dialing, Storing numbers, 1FAX Number, 1SET

INITIAL SETTINGS

STORING NUMBERS FOR AUTOMATIC DIALING

Automatic Dialing is a quick and convenient way to dial by using only a Rapid key (Rapid Key Dialing), or pressing the [SPEED/SEARCH] key and select the SPEED and entering a two digit number (Speed Dialing).

To use Automatic Dialing, you must first store the full number. The way you store it depends on whether you want to use it for Rapid Key Dialing or Speed Dialing:

Storing numbers

Use the following procedure to store numbers for Rapid Key Dialing or Speed Dialing:

1 Press the [MENU] key.

6 Press the Rapid Key or enter the Speed Dial number that you wish to program.

1,2,3,

1,2,3,

2 Press the [] key ( ) or [] key ( ) until "2:ENTRY MODE" appears, and

	SPEED/	BROAD-	RECEPTION REDIAL/
MEMORY SEARCH		CAST	MODE	PAUSE
RESOLU-		COVER		2-SIDE
TION	CONTRAST SHEET		REPORT	TX
	LINE STATUS			SPEAKER

To program a Rapid Key,

press a Rapid key ("01" 2 to "18").

To program a Speed Dial number, press two numeric keys ("00" to "99") and then press the [OK] key.

then press the [OK] key.

Selection

"2:ENTRY MODE"

3 Press the [] key ( ) or [] key ( ) until "1:FAX NUMBER" appears, and then press the [OK] key.

Selection

"1:FAX NUMBER"

4 Press the [] key ( ) or [] key ( ) to select the type of auto-dial number that you wish to program.

	To program a Rapid Key,
	select "1:RAPID KEY".
	To program a Speed Dial
1,2,3,	number, select
1,2,3,
	"2:SPEED #".

7 Enter the fax number with the numeric keys.

Enter the fax number (maximum of 40 digits including pauses) using the numeric keys.

8 Press the [OK] key.

1,2,3,

1,2,3,

5 Press the [] key ( ) or [] key ( ) until "1:SET" appears, and then press the [OK] key.

Selection

"1:SET"

41