Sharp AR-FX9 Selecting Settings for the Function, Press the Mode Select key to select fax mode

SELECTING SETTINGS FOR THE FUNCTION

The general procedure for configuring settings for the fax function is explained below. Follow this procedure to configure the settings explained on pages 6 through 9.

An item can also be selected after pressing the [MENU] key by pressing the numeric key for the item (the key Note corresponding to the number that appears in front of the item). When the numeric key is pressed, the item is

selected or entered.

1 Press the [MODE SELECT] key to select fax mode.

	The "FAX" indicator lights
	up to indicate that fax
R	mode is selected.

2 Press the [MENU] key.

"FAX MAIN MANU" will appear in the display.

1,2,3,

1,2,3,

3 Press the [] key () or [] key () key to select a menu item and press the [OK] key.

	The item is selected.
	Repeat this step until the
	item that you wish to
1,2,3,	configure appears.
1,2,3,

4 Select a setting or enter information

	To select a setting:
	Press the [		] key (	)
	or [	] key (	) until the
1,2,3,	setting is selected.
1,2,3,

To enter information: Press the numeric keys to enter characters or numbers.

•If you mistakenly select the wrong item, Note press the [CLEAR] key ( ) and repeat

the procedure from step 2.

•To cancel a setting for a fax function, press the [MENU] key.

5 Press the [OK] key.

The setting or information is entered.

1,2,3,

1,2,3,

6 Press the [MENU] key.

Press the [MENU] key to exit.

1,2,3,

1,2,3,

10