Sharp AR-FX9 manual Timer Operations, 1TIMER Mode, Press the key or key to select 1SET

TIMER OPERATIONS

The timer function allows you to set a transmission or polling operation to be performed automatically at a time you specify. Up to five transmission operations or polling operations can be set at any one time, and the times they will be performed can be specified up to a week in advance.

You can use this function, for example, to take advantage of lower night time telephone rates without having to be there when the operation is performed.

●For a timer transmission, scan the original into memory when you set the transmission. Scanning the original into memory is convenient because you do not have to worry about original mix-ups or forgetting to load the original.

●If the memory becomes full while the original is being scanned, "MEMORY FULL" will appear in the display.

•Press the [START] key ( ) to transmit the pages that have been stored up to that point in memory.

•Press the [CLEAR ALL] key ( ) to cancel the entire transmission.

Your fax machine Recipient

•Select the recipient -sending method -time

•Select transmission settings

The scheduled	beep
time arrives
Transmission begins	Transmission
	/reception

Setting up a timer transmission job:

1 Press the [MENU] key.

1,2,3,

1,2,3,

4 Enter the time at which transmission will take place with the numeric keys.

Enter two digits for the hour and two digits for the minute.

2 Press the [] key ( ) or [] key ( ) until "1:TIMER MODE" appears, and then press the [OK] key.

Selection

"1:TIMER MODE"

3 Press the [] key ( ) or [] key ( ) to select "1:SET".

Selection

"1:SET"

To cancel a timer operation, select "2:CLEAR".

5 Press the [] key ( ) or [] key ( ) to select "AM" or "PM" and press the [OK] key.

1,2,3,

1,2,3,

78