Sharp AR-FX9 manual Polling, 8POLLING Mode

POLLING

Polling allows you to request another fax machine to send an original to your fax machine. In other words, the receiving fax machine, not the transmitting fax machine, activates the transmission. You can use your fax to both poll and be polled by others.

Serial polling can be used to poll multiple fax machines (maximum of 100) in a single operation.

POLLING

You can request that another fax machine send you the original that is set in that fax machine. You can perform a polling operation at a scheduled time. (See "TIMER OPERATIONS" (p.78))

Polling fax

		beep
	Select polling
Other fax memory		Fax received
	polling	sending
	memory
Original is set	Original is scanned	Polling is approved
	into memory

Follow these steps to use the polling function:

1 Press the [MENU] key.

1,2,3,

1,2,3,

2 Press the [] key ( ) or [] key ( ) until "8:POLLING MODE" appears, and then press the [OK] key.

Selection

"8:POLLING MODE"

3 Dial the number of the fax machine you want to poll using one of the following methods:

•Press a Rapid Key.

If you press a Rapid Key, the next step is not necessary.

•Press the [SPEED/SEARCH] key and enter a two-digit Speed Dial number.

•Enter the fax number with the numeric keys.

A group key can be pressed to perform Note serial polling. Fax reception will take place in

the order that the destinations are stored in the Group Key.

4 Press the [START] key ( ).

72