Sharp AR-FX9 manual Press the Menu key Press the key or key to select 1ON, 11SECURITY Select

SPECIAL FUNCTIONS

RESTRICTING POLLING MACHINES (POLLING SECURITY)

If you wish to allow only specified fax machines to poll your fax machine, enable polling security and program the fax numbers of the machines that are to be allowed to poll your machine. When this is done, polling will take place when the fax number of the polling machine matches one of the fax numbers that have been programmed in your machine. Up to 10 passcode numbers (fax numbers of machines that are allowed to poll your machine) can be programmed.

To enable polling security and program passcode numbers, see "Programming/deleting passcode numbers:" on page 78.

[Preparation]	[When polling]
Polling fax	beep
Enter the fax number	Select polling or serial polling
for your fax machine

Fax is received

	polling
	Entered fax	Permitted fax
Enter the fax number of	number	number
fax machines you want
to allow to poll your fax
machine	These two numbers are compared

Fax being polled

[Preparation]

sending

numbers match

polling allowed

Follow these steps to enable polling security:

1 Press the [MENU] key.

1,2,3,

1,2,3,

4 Press the [] key ( ) or [] key ( ) to select "1:ON".

Selection

"1:ON"

To turn off polling security, select "2:OFF".

2 Press the [] key ( ) or [] key ( ) until "4:USER PROGRAM" appears, and then press the [OK] key.

Selection

"4:USER PROGRAM"

3 Press the [] key ( ) or [] key ( ) until "12:SECURITY SELECT" appears, and then press the [OK] key.

Selection

"11:SECURITY SELECT"

5 Press the [OK] key.

1,2,3,

1,2,3,

6 Press the [MENU] key.

Press the [MENU] key to exit.

1,2,3,

1,2,3,

76