Sharp AR-FX9 CANCELING A TIMER TRANSMISSION JOB

79
SPECIAL FUNCTIONS
5
6Press the [ ] key ( ) or [ ] key ( )
to select the day of the week and
press the [OK] key.
7Press the [ ] key ( ) or [ ] key ( )
to select the transmission mode and
press the [OK] key.
The selections are as
follows:
1:SEND MODE
2:BROADCAST MODE
3:POLLING MODE
4:SERIAL POLL MODE
8Enter the fax number of the other
machine using one of the following
methods:
•Press a Rapid key.
•Enter a Speed Dial number with the numeric
keys.
•Enter the fax number with the numeric keys.
9Press the [OK] key.
CANCELING A TIMER TRANSMISSION JOB
After a timer transmission job is set up, the job goes on standby until the specified time of transmission. If necessary,
the MEMORY STATUS function can be used to cancel a timer transmission job that is on standby ("CANCELING
(DELETING) A STORED FAX JOB" on page 61).
1,2,3,
1,2,3,
1,2,3,
1,2,3,
1,2,3,
1,2,3,