Operation | Mode Functions |
|
|
| |
Set DCS Privacy Codes | • | |
Mode/Power |
| |
To select a DCS privacy code: |
| |
|
| |
| 1. After selecting a channel, press the Mode/Power |
|
| button until the DCS icon appears and the small | |
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
•
In VOX mode, your microTALK® radio can be used
| numbers flash on the display (01 through 83). | |
DCS Privacy Code | If CTCSS is turned on at the channel | |
| ||
| selected, the display will flash the DCS | |
| icon and “OFF.” To switch from CTCSS to | |
| DCS, press the Channel Up or Channel | |
Channel Button | Down button while the display is flashing | |
“OFF.” The display will then show the | ||
| ||
| small numbers flashing and you will then | |
| be able to proceed to step 2. |
2.Press using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance.
3.When DCS privacy code is displayed, choose one of the following:
a.Press the Mode/Power button to enter the new setting and proceed to other functions.
b.Press and hold the Mode button to enter the new setting and return to Standby mode.
c.Press Talk or Call/Lock button to enter the new setting and return to Standby mode.
d.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
Mode/Power |
VOX Icon |
Channel Button
Mode/Power |
VOX Sensitivity Level
C
hannel Button
To turn VOX mode on or off:
1.Press the Mode/Power button until the VOX icon flashes on the display. The current On or Off setting is displayed.
2.Press the Channel Up or Channel Down button to turn VOX On or Off.
3.Choose one of the following:
a.Press the Mode/Power button to enter the new setting and proceed to other functions.
b.Press and hold the Mode button to enter the new setting and return to Standby mode.
c.Press Talk or Call/Lock button to enter the new setting and return to Standby mode.
d.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
To set VOX sensitivity:
1.Press the Mode/Power button until the VOX icon flashes and the current sensitivity level is displayed.
The current VOX sensitivity level is displayed with letters “LE” and a Number 1 through 5, with Number 5 being the most sensitive level and Number 1 being the least sensitive level.
2.Press the Channel Up or Channel Down button to change the setting.
3.Choose one of the following:
a.Press the Mode/Power button to enter the new setting and proceed to other functions.
b.Press and hold the Mode button to enter the new setting and return to Standby mode.
c.Press Talk or Call/Lock button to enter the new setting and return to Standby mode.
d.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
8
Nothing Comes Close to a Cobra® 9
