Mode Functions |
| |
Operation |
| |
Channel Scan | • | |
Your microTALK® radio can automatically scan channels. | ||
|
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
Your microTALK radio can automatically scan the Privacy Codes (either•
Scan Button |
To scan channels:
1. Press and release the Scan button until the Scan |
CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a time.
HI / LO | SCAN |
|
Scan Channels
icon and the channel numbers appear |
on the display. |
2. Press and hold the Scan button to begin scanning |
channels. |
The radio ignores specific privacy codes while scanning channels.
Scan Butto
n
HI / LO | SCAN |
|
Channel Button
To scan privacy codes:
1.While in Standby mode, press and release the Scan button twice (CTCSS) or three times (DCS) until the CTCSS or DCS icon and numbers are flashing.
2.Press and hold the Scan button to begin scanning privacy codes within the selected channel.
Channel Button
The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.
Select Channel
During scanning (while receiving an incoming transmission), you can choose from the following:
a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode.
b. Press the Channel Up or Channel Down button to resume scanning channels.
c. Press and hold the Scan button to return to Standby.
12
Scan Privacy Codes
The Scan icon will continue to be displayed when privacy code scan is on. Your radio will continue to scan privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for 10 seconds.
During scanning (while receiving an incoming transmission), you can choose from the following:
a. Press the Mode/Power button to enter the new setting and proceed to other functions.
b. Press and hold the Mode button to enter the new setting and return to Standby mode.
c. Press Talk or Call/Lock button to enter the new setting and return to Standby mode.
d. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
Nothing Comes Close to a Cobra® 13
