Operation
Mode Functions
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
Ten Call Tone Settings | • |
You can choose between ten different Call Tone Settings to transmit | |
a call alert. |
|
Your listener will hear an audible tone when you release the Talk button. • This alerts the other party that you are finished talking and it is OK for
To change a call tone setting:
them to speak.
Call Tone Setting
Channel Button
1.Press the Mode/Power button until the letter “C” and the current call tone number (01 through 10) is displayed. The current call tone will sound for three seconds.
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.Choose one of the following:
a.Press the Mode/Power button to enter the new setting and proceed to other functions.
b.Press and hold the Mode button to enter the new setting and return to Standby mode.
c.Press Talk or Call/Lock button to enter the new setting and return to Standby mode.
d.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
Mode/Power |
Roger Beep Off
Channel Button |
To turn roger beep on or off:
1.Press the Mode/Power button until the Roger Beep icon flashes. The current on or off setting is displayed.
2.Press the Channel Up or Channel Down button to select roger beep on or off.
3.Choose one of the following:
a.Press the Mode/Power button to enter the new setting and proceed to other functions.
b.Press and hold the Mode button to enter the new setting and return to Standby mode.
c.Press Talk or Call/Lock button to enter the new setting and return to Standby mode.
d.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
VibrAlert® and Call Alert | • | |
| Your microTALK® radio can alert you to incoming | |
|
| |
Call Tone On/ | signals by sounding an audible call tone, by |
|
Vibrate On | vibrating silently or both. |
|
|
| |
Key Tone On/Off | • |
When Key Tone is On, an audible tone will sound each time a button | |
is pressed. |
|
Call Tone On/ Vibrate Off
10
To change call settings:
1.Press the Mode button until the Call Setting icon flashes on the display. The current setting (“01” vibrate + ring, “02” ring only) is displayed.
2.Press the Channel Up or Channel Down button to change the call setting.
3.Choose one of the following:
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press and hold the Mode button to enter the new setting and return to Standby mode.
c.Press Talk or Call/Lock button to enter the new setting and return to Standby mode.
d.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
Mode/Power |
Channel Button |
To turn key tone on or off:
1.Current key tone status On/Off will flash.
2.Press the Channel Up or Channel Down button to select key tone on or off.
3.Choose one of the following:
a. Press the Mode/Power button to enter the new setting and proceed to other functions.
b. Press and hold the Mode button to enter the new setting and return to Standby mode.
c. Press Talk or Call/Lock button to enter the new setting and return to Standby mode.
d. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
Nothing Comes Close to a Cobra® 11
