Installation and Start-Up

Microphone Bracket Mounting Kit

Mounting and Powering the Radio

Microphone Bracket Mounting Kit

To Install The Microphone Bracket Mounting Kit:

Install the microphone bracket mounting kit on a vertical surface near the transceiver using the supplied stainless steel screws.

Installation and Start-Up

Warning Sticker

WARNING

This equipment is designed to generate a digital maritime distress and safety signal to facilitate search and rescue. To be effective as a safety device, this equipment must be used only within communication range of a shore-based VHF marine channel 70 distress and safety watch system. The range of the signal may vary out under normal conditions should be approximately 20 nautical miles.

Mounting and

Powering the Radio

Warning Sticker

FCC regulations require that the Warning Sticker supplied with this radio be applied to a spot where it is easily seen by the radio operator. Be sure the location is clean and dry before applying the sticker.

Use Supplied Template

See final pages for template.

Insert Transceiver

Attach Mounting Brackets

Flush Mount

A Flush Mount kit is included with your CobraMarine VHF radio to allow its installation in almost any flat surface.

To Mount the Transceiver Flush in Almost any Flat Surface:

1.Use the supplied template (VHF Radio MRF80) to mark and cut an opening in the flat surface. See page 80 for template.

NOTICE

Before cutting, be sure the area behind the flat surface is clear of any instruments, wires or structure that might be damaged in the process.

2.Insert the transceiver into the opening.

3.Attach the mounting brackets to the sides of the transceiver with

Power Connection Cable

NOTE

This radio

 

Electrical Power Connection

 

Electrical power is supplied to the

 

transceiver by two (2) bullet-type

 

connectors coming from a 13.8-volt DC

 

voltage source (12-volt nominal). The

Red Cable

positive lead must be attached to a fused

connector.

Positive (+)

 

Black Cable

To Connect to a Power Source:

Negative (-)

1. Attach the black (-) wire to a

 

negative (-) ground.

2.Attach the fused red power (+) wire to the positive (+) side of the power system.

will draw up to 8 amps when transmitting at full power.

Adjusting Screws

the adjusting screw flanges facing the back of the flat surface.

4. Tighten the adjusting screws against the back of the flat surface until the flange on the front of the transceiver is tight against the flat surface. Do not over-tighten.

NOTE

Cobra Accessory Harness CM 140-001 is an optional wire harness that is used to interface the MR F80 radio with the Cobra MC 600C Series chartplotters.

NOTICES

A reverse polarity connection will damage the radio.

When replacing the fuse in your transceiver, use only the size and type originally provided.

 

 

 

 

16 English

Nothing Comes Close to a Cobra® 17

Page 12
Image 12
Cobra Electronics MR F80B-D owner manual Mounting and Powering the Radio, Microphone Bracket Mounting Kit, Flush Mount

MR F80B-D specifications

The Cobra Electronics MR F80B-D is a compact and feature-rich fixed mount VHF marine radio designed specifically for boating enthusiasts and maritime professionals. Renowned for its robust construction and innovative technology, this radio ensures reliable communication over marine channels, even in adverse weather conditions.

One of the standout features of the MR F80B-D is its built-in GPS, which provides real-time location tracking. This functionality is crucial for ensuring safety on the water, allowing users to quickly and accurately communicate their position in case of emergencies. The built-in GPS also supports DSC (Digital Selective Calling), which is an essential safety feature that enables users to send distress signals with just a push of a button, instantly alerting nearby vessels and coast guards.

The Cobra MR F80B-D is designed with user-friendliness in mind. Its large, easy-to-read display ensures that critical information is visible, even in bright sunlight. The intuitive navigation menu allows users to switch between channels and settings with ease. Its robust weatherproof construction guarantees continued operation in harsh marine environments, protecting it from saltwater, humidity, and extreme temperatures.

Additionally, the MR F80B-D incorporates a noise-canceling microphone that enhances voice clarity, ensuring that communications are crisp and clear. It features 10 NOAA weather channels, providing real-time weather updates, helping users stay informed about changing weather conditions while on the water. The built-in dual watch feature allows simultaneous monitoring of two channels, ensuring that no important communications are missed.

For those who need to stay connected to their devices, the MR F80B-D comes equipped with a USB charging port, making it straightforward to charge smartphones or other devices on board. The radio operates on both 25 watts and 1 watt, allowing users to select the appropriate power level based on their needs and proximity to other vessels or coastal facilities.

In conclusion, the Cobra Electronics MR F80B-D is a versatile and reliable marine radio that offers a combination of advanced features, including built-in GPS, DSC functionality, and a user-friendly interface. Its durability and ease of use make it an excellent choice for both recreational boaters and maritime professionals, ensuring secure and effective communication on the water.