![](/images/new-backgrounds/1247190/24719061x1.webp)
Operating Your Radio
All Ships Call Menu
All Ships Call Select
All Ships Call Send
Digital Select Calling (DSC) ProductOperationFeatures
Regarding Distress Relay Calls
This radio cannot send Distress Relay calls. Only large ships and shore stations, with specially equipped radios, can send Distress Relay calls.
Receiving Distress Relay Calls
This radio does respond to a Distress Relay call just as it responds to a Distress call.
Sending an All Ships Call
Use the DSC All Ships call for the same urgency and safety purposes as the Pan and Securite voice calls as well as sending Routine messages to all stations at once. The DSC All Ships call reaches all stations in radio range. Use the DSC All Ships call for urgent, but not
To Send an All Ships Call:
1.In Standby mode, select a channel to communicate a routine call. The radio uses Channel 16 for urgent and safety calls.
2.Press the Call/Setup button to enter the Call Setup menu.
3.Scroll to All Ships.
4.Press Enter button for All Ships Call Select.
5.Press the Enter button twice to send a message.
NOTE
The radio display requires confirmation before sending Urgency and Safety calls.
Operating Your Radio
All Ships Call MMSI Directory Match
Digital Select Calling (DSC) ProductOperationFeatures
6.Depending on the type of message selected, the radio automatically switches to a voice channel.
a.After Urgency and Safety calls, the radio switches to Channel 16. Once on channel, press the Talk button to send the Urgency or Safety voice message.
b.After a Routine call, the radio switches to the channel selected. Once on channel, press the Talk button to send the Routine voice message.
DSC equipped radios that receive a DSC All Ships call message are automatically switched to the channel selected by the sender to hear a voice message unless Automatic Channel switching been turned off.
To return to Standby mode, without sending a message, scroll to EXIT and press the Enter button.
Receiving an All Ships Call
All Ships calls received from stations within range of the radio sound the Distress alarm and switch the radio to Channel 16.
When an All Ships Call is Heard:
1.Press any button to turn Off the alarm and return to
Standby mode.
2.Read and write down the MMSI information of the vessel sending the call as well as the date and time of the call.
3.Listen to the incoming voice message on the channel the radio selects for the incoming All Ships call.
|
|
|
|
54 English | Nothing Comes Close to a Cobra® 55 |