Volume

The On-Off Power/Volumeknob also controls the speaker
Volume.The Volume adjustment applies only to what you
hear from the speaker and does not affect the Volume of
your outgoingmessages, which is controlled by the
circuitry of your radio.
To Increase The Volume:
1.Turn the On-Off Power/Volume knob clockwise.
To Decrease The Volume:
1.Turn the On-Off Power/Volume knob counter-clockwise.

Squelch

Squelchcontrol filters weak signals and radio
frequency noise so that you can more clearly hear
the signals you want.
To Squelch Your Radio:
1.With the Squelch knob turned fully counter-clockwise,
turn the On-Off Power/Volumeknob clockwise until you
hear a hissing (noise) sound.
2.Turn the Squelch knob clockwise until the hissing
sound stops. Turning the Squelchknob further clockwise
will filter weak and medium strength signals until only the
strongest signal can get through at its highest setting.
To receive weaker signals, turn the Squelchknob
counter-clockwise.
If the squelchis set so you can hear a continuous hissing
sound, the scan and tri-watch functions will be blocked.
31
Nothing comes close to a Cobra®
30 English
Getting Started Getting Started
Getting Started •
Refer to the foldout on the front cover of this manual to identify the various
controls and indicators on your radio.
Throughout this manual you will be instructed to press or to press and hold buttons
on the radio. Press means a momentary press, the n release; press and hold means
to hold the button down.
Whenever you press any button except the Talkbutton on your radio, a brief tone
(beep) will sound to confirm the button press. With all button presses, the appropriate
icon will appear on the LCD and the backlight will turn On.The backlight will stay
Onfor five (5) seconds after the button is released.
At times you will hear two (2) other sounds. Two (2) beeps will sound to confirm
your setting changes and three (3) beeps will sound to notify you of an error.

Power On-Off

The On-Off Power/Volume knob on the top of the radio is held in the Offposition
by a click stop.
To Turn Your Radio On:
1.Turn the Squelch knob half-way counter-clockwise
(when viewed from above).
2.Turn the On-Off Power/Volume knob clockwise
until you hear and feel a click.
When the radio is powered On,a brief tone will sound,
the display backlight will turn On,and the display will
show all icons for two (2) seconds. All buttons will be
inoperative during these two (2) seconds.
After two (2) seconds, the radio will return to the settings
in effect when it was last powered Off,the LCD will show
the appropriate icons, and all controls will be operative.
The radio will then be in Standbymode.
To Turn Your Radio Off:
1.Turn the On-Off Power/Volume knob all the way
counter-clockwise until you hear and feel a click.
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
Caution Warning
Installation Customer
Assistance
Operating Your Radio
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
Caution Warning
Installation Customer
Assistance
Operating Your Radio
On-Off Power/Volume Knob
On-Off Power/Volume Knob
Squelch Knob
On-Off Power/Volume Knob
Squelch Knob