Operating Your Radio
Position Request
Receiving a Position
No Position Data
62 English
DSC Operation
6.Press the Call/Set button.
Your radio will send the position request and there will be one (1) of three (3) possible responses:
■You will receive the position.
■You will receive a no position data response, meaning the station you queried is not connected to a GPS device and cannot send its position.
■You will receive a no reply response, meaning the operator of that station has chosen not to reply to your request.
Choose one (1) of the following:
If You Receive A Position:
The requested position with the station name and MMSI will show on your screen.
Press the Call/Set button to return to Standby mode after you have noted the station’s position.
If The Station You Called Cannot Send Its Position:
NO POS DATA (no position data) will show on your screen.
1.Press the Call/Set button to return to the Individual Directory menu.
2.Use the Up/Down buttons to scroll to EXIT.
3.Press the Call/Set button to return to the Call Send menu.
4.Use the Up/Down buttons to scroll to EXIT.
5.Press the Call/Set button to return to Standby mode.
Operating Your Radio
Resend The Request
DSC Operation
If The Station You Called Chose Not To Reply:
NO REPLY will show on your screen.
You will have two (2) choices:
■RESEND the request.
■EXIT the Position Request mode.
To Resend Your Position Request:
1.Use the Up/Down buttons to scroll to RESEND.
2.Press the Call/Set button.
To Exit The Position Request Mode:
1.Use the Up/Down buttons to scroll to EXIT.
2.Press the Call/Set button to return to the Individual Directory menu.
3.Use the Up/Down buttons to scroll to EXIT.
4.Press the Call/Set button to return to the Call Send menu.
5.Use the Up/Down buttons to scroll to EXIT.
6.Press the Call/Set button to return to Standby mode.
Nothing Comes Close to a Cobra® 63
