Included In This Package

Installation And Start-Up

Included In This Package

You should find all of the following items in the package with your CobraMarine VHF radio:

Transceiver*

Transceiver Surface Mount Kit

Microphone

Microphone MountingKit

Operating Instruction Manual

Warning Sticker

GPS Interface Cable

*The term transceiver will be used to identify the main unit containing the LCD screen and controls. Radio will be used to identify the entire equipment including transceiver, microphone, antenna, and any attached external speakers.

Mounting And

Powering The Radio

Installation And Start-Up

Mounting And Powering The Radio

Before using your CobraMarine VHF radio, it must be installed on your vessel.

Installing Your Radio

Choose a location for your radio where it will be conveniently accessible with the following factors in mind:

The leads to the battery and the antenna are best kept as short as possible.

The antenna must be mounted at least 3 feet from the transceiver.

The radio and all speakers need to be far enough from any magnetic compass to avoid deviation due to the speaker magnet.

There needs to be free air flow around the heat-sink fins on the back of the transceiver.

Surface Mount

A Surface Mounting kit is included with your CobraMarine VHF radio to allow its installation on almost any flat surface.

Surface Mounting Kit

To Mount The Transceiver

 

On Almost Any Flat Surface:

1. Use the mounting bracket as a template to drill holes for the mounting screws.

2. Attach the mounting bracket to the chosen surface.

3. Attach the transceiver to the mounting bracket with the locking knobs.

4. Tilt the transceiver to a convenient angle and tighten the locking knobs.

Tilt Lock Knobs

 

 

 

 

26 English

Nothing Comes Close to a Cobra® 27

Page 16
Image 16
Cobra Electronics MRF45 owner manual Included In This Package, Mounting Powering The Radio, Mounting And Powering The Radio