Mode Functions
Operation
10 Memory Locations
•
Your microTALK® radio has 10 Memory Locations for storing your most frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned. (See page 18 for memory location scan.)
Mode/Lock Button To program a memory location:
1. Press the Mode/Lock button until the |
Memory icon and the memory location |
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
While setting a memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.
Mode/Lock Button To recall a stored memory channel location:
1.Press the Mode/Lock button until the Memory icon and the memory location number flash on the display.
flash on the display. |
Memory Icon
2. Press the Channel Up or Channel Down |
Memory Icon
Channel Buttons
Enter/Hi•Low Button
2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
3.Press the Enter/Hi•Low button to enter a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.
4.Press the Channel Up or Channel Down button to select a channel (1 through 22).
5.Press the Enter/Hi•Low button. The privacy code numbers will flash on the display.
6.Press the Channel Up or Channel Down button to select a privacy code (00 to 38).
Channel Buttons
button to select a memory location |
(0 through 9). |
If a location has been programmed before, its associated channel/privacy code will be shown on the display.
3.Press the Talk button to return to Standby mode on the selected memory location.
A memory location can be reprogrammed at any time it is displayed. Press the Enter/Hi•Low button to begin.
While recalling a stored memory location,
if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.
7.Choose one of the following:
a.Press the Enter/Hi•Low button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.
b.Press the Mode/Lock button to enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.
c.Press the Talk button to enter the channel/privacy code in the selected memory location and return to Standby mode on the selected memory location.
|
|
|
|
12 English | Nothing Comes Close to a Cobra® 13 | ||
