Invacare Adjustable ASBA Seat service manual Arms, Installing/Removing Flip Back Armrests

SECTION 8—ARMS

SECTION 8—ARMS

WARNING

After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.

Installing/Removing Flip Back Armrests

WARNING

Make sure the flip back armrest release and height adjustment levers are in the locked position before using the wheelchair.

NOTE: For this procedure, refer to FIGURE 8.1.

NOTE: Flip back armrest release lever must be in the unlocked (up‐horizontal) position when placing the armrest into the arm sockets.

Installing

1. Visually inspect to ensure flip back

armrest release lever is in the unlocked

Flip Back Armrest

Flip Back

(up‐horizontal) position.

Armrest

Locked

2.	Slide the flip back armrest into the arm
	sockets on the seat frame.
3.	Install the quick‐release pin through
	the rear arm socket and flip back
	armrest.
4.	Lock the flip back armrest by pressing
	the flip back armrest release lever into
	the down (vertical) position.
5.	Repeat STEPS 1‐4 for the opposite flip
	back armrest.

Removing

1.Unlock the flip back armrest by positioning the flip back armrest release lever into the up (horizontal) position.

(Down -

Release Vertical)

Lever

	Unlocked
	(Up -
Rear	Horizontal)
Arm
Socket	Seat
Quick-
	Frame
Release Pin
	Front Arm Socket

FIGURE 8.1 Installing/Removing Flip Back

Armrests

2.Remove the quick‐release pin that secures the flip back armrest to the rear arm socket.

3.Pull UP on the flip back armrest and remove the armrest from the arm sockets.

4.Repeat STEPS 1‐3 for the opposite flip back armrest, if necessary.

Part No 1143238 43 Adjustable ASBA Seat