Invacare Adjustable ASBA Seat service manual Front Riggings, Installing/Removing Footrests

SECTION 6—FRONT RIGGINGS

SECTION 6—FRONT RIGGINGS

WARNING

After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result.

Before performing any maintenance, adjustments or service, ALWAYS turn the wheelchair power off, otherwise injury or damage may result.

Installing/Removing Footrests

PH904A, PHAL4A, 70° and PW93

NOTE: For this procedure, refer to FIGURE 6.1.

1.Turn the footrest to the side (open footplate is perpendicular to wheelchair).

2.Install the hinge plates on the footrest onto the hinge pins on the wheelchair frame.

Hinge

Pins

Hinge Plate

Footrest

Footrest Release

Lever

3.Push the footrest towards the inside of the wheelchair until it locks into place.

NOTE: The footplate will be on the inside of the wheelchair when locked in place.

FIGURE 6.1 Installing/Removing Footrests - PH904A, PHAL4A, 70° and PW93

4.Repeat STEPS 1‐3 for other footrest assembly.

5.To remove the footrest, push the footrest release lever inward, rotate footrest outward.

6.Adjust footrest height if desired. Refer to Adjusting the Footrest Height on page 25.

Adjustable ASBA Seat 24 Part No 1143238