SECTION
Removing/Installing the Manual Center Mount Footrest
NOTE: For this procedure, refer to FIGURE 5.1.
Removing
1.Remove the rigging pivot pin that secures the footrest to the mounting bracket of the seat frame.
2.Hold the footrest with one hand and engage the release lever with the other while simultaneously pulling the center mount footrest out of the mounting bracket of the seat frame.
Installing
1.Engage the release lever with one hand, hold the center mount footrest with the other, and insert the center mount footrest into the mounting bracket of the seat frame.
2.Reinstall the rigging pivot pin to secure the center mount footrest to the mounting bracket of the seat frame.
DETAIL “A” - CHAIRS BUILT | Release Lever |
BEFORE 12/01/2008 |
Rigging Pivot Pin
Mounting Bracket
Center Mount Footrest
DETAIL “B” - CHAIRS BUILT
AFTER 12/01/2008
Seat Frame Mounting Bracket
Center Mount Footrest
NOTE: Release Lever located towards the front or center of seat frame.
Rigging Pivot Pin
Adjustable ASBA Seat | 18 | Part No 1143238 |
