Invacare Adjustable ASBA Seat specs

SECTION 5—CENTER MOUNT FOOTRESTS

Adjusting the Tension of the Flip Up Footplate

Chairs built before 12/01/2008

NOTE: For this procedure, refer to FIGURE 5.7.

NOTE: The tension can be adjusted to increase or decrease the rotation effort of the flip up footplates.

1.Loosen the mounting screw on the footrest angle hinge to decrease the rotation effort.

NOTE: DO NOT remove the footplate mounting screw.

2.Tighten the mounting screw on the footrest angle hinge to increase the rotation effort.

3.Repeat STEPS 1 and 2 for the other footplate.

Center Footplate

Mount

Footrest

Footrest

Angle Hinge

Mounting Screw

FIGURE 5.7 Adjusting the Tension of the

Flip Up Footplate -

Chairs built before 12/01/2008

Chairs built after 12/01/2008

NOTE: For this procedure, refer to FIGURE 5.8.

NOTE: The tension can be adjusted to increase or decrease the rotation effort of the flip up footplates.

1.Loosen the mounting screw on the front rigging angle hinge to decrease the rotation effort.

NOTE: DO NOT remove the footplate mounting screw.

2.Tighten the front rigging angle hinge mounting screw to increase the rotation effort.

3.Repeat STEPS 1 and 2 for the other footplate

Footplate

Center Mount

Footrest

Mounting Screw

FIGURE 5.8 Adjusting the Tension of the

Flip Up Footplate -

Chairs built after 12/01/2008

Part No 1143238

23

Adjustable ASBA Seat

Image 23

Invacare Adjustable ASBA Seat service manual Adjusting the Tension of the Flip Up Footplate

Contents

Adjustable Asba Seat Reference Documents Useful Terms Table of Contents Arms Adult Seats Junior Seats Special Notes Signal Word Meaning Special Notes All Wheelchairs with Trro Wheelchairs without Trro Label LocationsAll Wheelchairs Typical Product Parameters Adjustable Asba Seat Operation Information Repair or Service InformationGeneral Guidelines Tire Pressure Weight Limitation Pinch Points SAFETY/HANDLING of Wheelchairs EMI Information EMI Information Troubleshooting Safety INSPECTION/ TroubleshootingSafety Inspection Checklist Center Mount Footrests Removing Removing/Installing the Manual Center Mount FootrestInstalling Chairs built before 12/01/2008 Adjusting the Height of the Manual Center Mount Footrest Chairs built after 12/01/2008 Adjusting the Angle of the Manual Center Mount Footrest Adjusting the Angle of the Manual Center Mount Footrest Adjusting the Footplate Angle Chairs built before 12/01/2008 Adjusting the Footplate Angle Adjusting the Tension of the Flip Up Footplate PH904A, PHAL4A, 70 and PW93 Installing/Removing FootrestsFront Riggings PH904A and PHAL4A Front Riggings Adjusting the Footrest HeightTaper PW93 Adjusting the Footrest Height PW93 Raising/Lowering Elevating Front Riggings Replacing Heel Loops Adjusting/Replacing Telescoping Front Rigging Support Adjusting/Replacing Telescoping Front Rigging Support Installing Adjustable Angle Flip-up Footplates Installing Adjustable Angle Flip-up Footplate Hinge Perpendicular and/or Inversion/Eversion Adjustment Adjusting Adjustable Angle Flip-Up FootplatesDepth Adjustment Angle Adjustment Composite Replacing Composite/Articulating Footplate Heel Loop 14 Installing/Removing Elevating Legrests Installing/Removing Elevating Legrests Raising/Lowering Elevating Legrests Adjusting Calfpads Installing the Power Elevating Legrests Power Elevating LegrestsInstalling/Removing the Power Elevating Legrests Adjusting the Footplate Adjusting the Power Elevating LegrestsRemoving the Power Elevating Legrests Adjusting the Footplate Depth Adjusting the Footplate Angle Adjusting the Calf Pad Width Adjusting the Calf Pad Adjusting the Calf Pad Height Adjusting the Length for Power Legrest Removing/Installing the Power Elevating Legrest Harness Seat frame for clarity Removing/Installing the Power Elevating Legrest Actuator Right power Arms Installing/Removing Flip Back Armrests Positioning Flip Back Armrests for Use Adjusting Flip Back ArmrestsAdjusting Positioning Flip Back Armrests for User Transfer Installing/Removing the Cantilever Arms Installing/Removing the Cantilever Arms Adjusting the Height of the Cantilever Arms Adjusting the Height of the Cantilever Arms Installing/Removing the Cantilever Arm Armpad Adjusting the Angle of the Cantilever Arms Removing the Contoura Back Removing/Installing the Contoura BackInstalling the Contoura Back Adult Backs Removing/Installing the Contoura Back Installing the Mounting Hardware onto the Contoura Back Adjusting the Back Angle Adjusting the Back Width Removing/Installing the Back Canes Adjusting the Back Height Removing/Installing the Back Canes Removing/Installing the Spreader Bar Removing/Installing the Spreader Bar Adjusting Spreader Bar Width Adjusting Spreader Bar Width Junior Backs 100 Non- Trro Back Cane Bracket Mounting Holes Washer Screws Adjusting the Back Height Removing Spreader Bar Cover Mounting Screw Back Cane Tube Mounting Screws Adult Seats Removing/Installing the Seat Pan Adjusting the Seat Width Side Rail Mounting Holes Adjusting the Seat Width Adjusting the Seat Depth Removing Side Rails Removing/Installing Side Rails Removing/Installing Side Rails Installing Side Rails Junior Seats Junior Seats To be removed for this procedure To be removed for this Cross BAR Mounting Holes Hex Screw Rear Arm Socket Adjustment Table Inch USA Limited Warranty