SECTION
Adjusting the Calf Pad
Adjusting the Calf Pad Width
NOTE: For this procedure, refer to FIGURE 7.5.
1.Remove the two button head screws from the calf pad and calf pad bracket.
2.Reposition calf pad to calf pad bracket to desired mounting position.
3.Align button head screws to mounting holes on calf pad and calf pad bracket.
4.Install button head screws into calf pad bracket and calf pad. Securely tighten.
5.Repeat STEPS 1‐4 for opposite side if necessary.
Calf Pad Bracket | Back View |
Mounting
Calf Pad
of Legrest
Holes
Mounting |
Holes |
Button
Head
Screws
Calf Pad | Calf Pad Bracket |
Button
Head
Screws
FIGURE 7.5 Adjusting the Calf Pad Width
Adjusting the Calf Pad Depth
NOTE: For this procedure, refer to
FIGURE 7.6.
1.Loosen, but DO NOT remove, hex screws.
2.Slide calf pad assembly up and out of the channel.
3.Remove the flat head socket screw, and locking hex nut that secure the calf bracket to the depth adjustment bracket.
4.Reposition the calf bracket on the depth adjustment bracket to desired position.
5.Install the flat head socket screw through the calf bracket, depth adjustment bracket and locking hex nut.
Flat Head |
| |
Socket |
| Channel |
Screw |
| |
|
| |
Locking | Depth |
|
Adjustment | ||
Hex | Holes |
|
Nut |
|
|
|
| Depth |
|
| Adjustment |
| Hex | Bracket |
Calf | Screws |
|
|
| |
Bracket |
|
|
NOTE: Calf pad not shown for clarity.
FIGURE 7.6 Adjusting the Calf Pad Depth
6.Tighten locking hex nut to screw until snug. DO NOT overtighten nut or calf pad will not pivot properly.
Adjustable ASBA Seat | 38 | Part No 1143238 |
