SECTION
Adjusting the Angle of the Manual Center Mount Footrest
WARNING
While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving, the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result.
NOTE: For this procedure, refer to FIGURE 5.1 and FIGURE 5.4.
1.Engage the release lever with one hand (not shown) and move the center mount footrest to the desired angle with the other hand.
NOTE: Refer to FIGURE 5.1 for the location of the release lever.
2.Disengage the release lever (not shown) to lock the center mount footrest in the new position.
DETAIL “A” - CHAIRS BUILT BEFORE 12/01/2008
Footplate
Center Mount Footrest
DETAIL “B” - CHAIRS BUILT AFTER 12/01/2008
Footplate
Center Mount Footrest 
FIGURE 5.4 Adjusting the Angle of the Manual Center Mount Footrest
Part No 1143238 | 21 | Adjustable ASBA Seat |
