Invacare Adjustable ASBA Seat service manual Adjusting the Footplate Angle

SECTION 7—POWER ELEVATING LEGRESTS

Adjusting the Footplate Angle

NOTE: For this procedure, refer to FIGURE 7.4.

1.Loosen, but DO NOT remove, the two flat head screws and the two barrel nuts that secure the footplate to the footplate clamp (Detail “A”).

2.Rotate the footplate clamp on the pivot hinge until the desired angle is achieved (Detail “B”).

3.Securely tighten footplate to footplate clamp and hinge pivot with the two flat head screws and barrel nuts.

4.Repeat STEPS 1‐3 for opposite side if necessary.

5.For additional angle adjustment, perform the following (Detail “C”):

A.Loosen the set screw.

B.Rotate footplate up or down to desired position.

C.Retighten set screw.

DETAIL “A”

Flat Head

Screws Footplate

Footplate

Clamp

Barrel Nuts

DETAIL “B”

Footplate

Footplate	Pivot Hinge
Clamp

DETAIL “C”

Direction of

Rotation

Set Screw

FIGURE 7.4 Adjusting the Footplate Angle

Part No 1143238 37 Adjustable ASBA Seat