Invacare Adjustable ASBA Seat service manual Right power

SECTION 7—POWER ELEVATING LEGRESTS

4.Remove the short shoulder screw and locknut securing the actuator rod to the actuator bracket.

5.Remove the power elevating legrest actuator from the legrest.

Installing

1.Unscrew the actuator rod ½ turn.

2.Secure the actuator rod to the actuator bracket using the short shoulder screw and locknut.

3.Secure the top of the power elevating legrest actuator to the power legrest bracket using the long shoulder screw, flat washer, washer and locknut.

NOTE: The shoulder screw should be on the inside of the legrest and the locknut should be toward the outside of the legrest.

4.Connect the actuator connector (not shown) to the TRECM or DLIAM connector (not shown).

5.Install the power elevating legrest. Refer to Installing/Removing the Power Elevating Legrests on page 34.

Power Legrest Bracket	NOTE: Rear of
	right power
Long Shoulder	elevating legrest
Screw	shown. Left
	legrest actuator
Flat Washer	mounts in the
	same way.
Inside of
Legrest	Locknut
Power Elevating Legrest Actuator	Washer
Actuator Rod	Outside of
	Legrest
Short Shoulder Screw
	Locknut
Actuator Bracket

FIGURE 7.10 Removing/Installing the Power Elevating Legrest Actuator

Adjustable ASBA Seat 42 Part No 1143238