SECTION 10—JUNIOR BACKS

Adjusting the Back Height

NOTE: For this procedure, refer to FIGURE 10.2.

1.Remove the two mounting screws and locknuts securing the push handle to the back cane.

2.Align the push handle mounting holes with the desired back cane mounting holes.

3.Secure the push handle to the back cane using the two mounting screws and locknuts. Torque to 75 in‐lbs ± 20%.

Push Handle

Back Cane

Push Handle

Mounting Holes

Back Cane

Mounting Holes

Locknuts

Mounting

Screws

FIGURE 10.2 Adjusting the Back Height

Part No 1143238

57

Adjustable ASBA Seat

Page 57
Image 57
Invacare Adjustable ASBA Seat service manual Adjusting the Back Height