Invacare Adjustable ASBA Seat service manual Chairs built after 12/01/2008

SECTION 5—CENTER MOUNT FOOTRESTS

Chairs built after 12/01/2008

WARNING

While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving, the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result.

NOTE: For this procedure, refer to FIGURE 5.3.

1.Remove the two mounting screws that secure the button head cleat to the extension housing.

2.Adjust the footrest extension tube to the desired height.

3.Secure the extension tube to the desired height with the button head cleat and mounting screws. Securely tighten.

4.Repeat STEPS 1‐3 for the other extension tube.

	Extension
Button Head Cleat	Housing

Extension Tube Mounting Holes

Mounting Screws

Extension Tube

FIGURE 5.3 Adjusting the Height of the Manual Center Mount Footrest -

Chairs built after 12/01/2008

Adjustable ASBA Seat 20 Part No 1143238