LEVEL WASHER/DRYER
IMPORTANT: Level washer/dryer properly to reduce excess noise and vibration.
1. Check levelness of washer/dryer
Place level here | Place level here |
|
With washer/dryer in its final location, place a level on top edges of washer/dryer. Use side seam as a guide to check levelness of sides. Check levelness of front using lid, as shown. Rock washer/dryer back and forth to make sure all four legs make solid contact with floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Not Level |
|
| LEVEL |
|
|
| Not Level |
| |||||||
2. Adjust leveling legs
If washer/dryer is not level, use a 1" or 25 mm
HELPFUL TIP: You may want to prop up front of washer/dryer about 4" (102 mm) with a wood block or similar object that will support weight of washer/dryer.
3. Plug into a grounded 3- or 4-prong outlet
21
