INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Parts needed: (Not supplied with washer/dryer)
nVent clamps
nVent elbows and ductwork
Check local codes, electrical supply and venting, and read “Electrical Requirements” and “Venting Requirements” before purchasing parts. Mobile home installations require metal exhaust system hardware available for purchase from the dealer from whom you purchased your washer/dryer. For further information, please reference the “Assistance or Service” section of the Washer/Dryer Use and Care Guide.
Optional equipment: (Not supplied with washer/dryer)
Refer to your Use and Care Guide for information about accessories available for your washer/dryer.
Alternate parts: (Not supplied with washer/dryer)
Your installation may require additional parts. To order, please refer to
If you have: | You will need: |
Overhead sewer | Standard 20 gal. (76 L) 39" (990 mm) |
| tall Drain Tub or Utility Sink, Sump |
| Pump and Connectors (available from |
| local plumbing suppliers) |
Floor drain | Siphon Break Part Number 285320, |
| Additional Drain Hose Part Number |
| 285702, and Connector Kit Part |
| Number 285442 |
1" (25 mm) standpipe | 2" (51 mm) diameter to 1" (25 mm) |
| diameter Standpipe Adapter |
| Part Number 3363920, |
| Connector Kit Part Number 285835 |
Laundry tub or | Sump pump system (if not already |
standpipe taller than | available) |
96" (2.4 m) |
|
Drain hose too short | Extension Drain Hose |
| Part Number 285664, |
| Connector Kit Part Number 285442 |
Lint clogged drain | Drain Protector Part Number 367031, |
| Connector Kit Part Number 285835 |
Water faucets | 2 longer water fill hoses: |
beyond reach | 6 ft (1.8 m) Part Number 76314, |
of fill hoses | 10 ft (3.0 m) Part Number 350008 |
4
