Whirlpool W10558490A Plan Vent System, Recommended exhaust installations, Venting Kits

Plan Vent System

Recommended exhaust installations

Typical installations vent the washer/dryer from the rear. Other installations are possible.

A	D
	E
	F
B
	G
C	H

A. Dryer	E. Elbow
B. Rigid metal or flexible metal vent	F. Clamps
C. Clamps	G. Elbow
D. Wall	H. Exhaust hood

Optional exhaust installations:

This washer/dryer can be converted to exhaust out the right or left side. To convert the washer/dryer, use Side Exhaust Kit Part Number 279823. If your washer/dryer was previously exhausted from the right or left side, it can be converted to rear exhaust by using standard offset connections. To cover the hole in the side, one of the following plugs can be added:

692790 (white)

3979370 (graphite)

3977784 (biscuit)

Follow the instructions in the kit to install. Kits are available from the dealer from whom you purchased your washer/dryer.

ABC

A.Standard rear offset exhaust installation

B.Rear exhaust for offset close-clearance connection

C.Left- or right-side exhaust installation

Alternate installations for close clearances

Venting systems come in many varieties. Select the type best for your installation. Three close-clearance installations are shown. Refer to the manufacturer’s instructions.

ABC

A. Loop system with standard elbows

B. Loop system with one offset and one standard elbow C. Vent system with one periscope (2" [51 mm] clearance)

NOTE: The following kits for close-clearance alternate installations are available for purchase.

Venting Kits

For more information, call 1-800-901-2042, or visit us at www.applianceaccessories.com. In Canada, call

1-800-807-6777 or visit us at www.whirlpoolparts.ca.

Part Number Descriptions

4396028 Over-the-Top Installation

4396037 0" (0 mm) to 18" (457 mm)

Metal vent periscope (For use with dryer vent to wall vent mismatch)

4396011 18" (457 mm) to 29" (737 mm)

Metal vent periscope (For use with dryer vent to wall vent mismatch)

4396014 29" (737 mm) to 50" (1.27 m)

Metal vent periscope (For use with dryer vent to wall vent mismatch)

4392892 In-Wall metal DuraVent™ Periscope

279818	4-way vent kit – white
W10186596	4-way vent kit – universal grey
4396028	Sure Connect™ venting kit
	(over-the-top installation)
4396009RP	5' Universal connect vent, flexible					dryer venting
4396010RP	6' SecureConnect™ vent, flexible					dryer venting
4396013RB	Dryer vent installer’s kit
4396033RP	5' flexible	dryer	venting	with	clamps
4396727RP	8' flexible	dryer	venting	with	clamps

4396004 Dryer offset elbow

4396005 Wall offset elbow

4396006RW DuraSafe™ close elbow

4396007RW Through-the-wall vent cap

4396008RP 4" steel dryer venting clamps – 2 pack

8212662 Flush mounting louvered vent hood 4"

16