O P E R AT I O N | ENGLISH |
ENGLISH | O P E R AT I O N |
Using the Scan Function (continued):
To scan privacy codes:
1.While in Standby mode, press the CHANNEL SELECT button up or down to choose the main channel you wish to scan.
c)Press the MODE button to proceed to memory location scanning (see below).
If you do not press any button within 10 seconds, the radio will automatically resume scanning privacy codes.
To scan memory locations (continued):
b)Push the CHANNEL SELECT button up or down to resume scanning memory locations.
CHANNEL SELECT button
1.Press the MODE button until the Ring Setting icon flashes and the current
setting (Vibrate + Ring, Vibrate Only, or Ring Only)
2. Press the MODE |
To scan memory locations:
is displayed.
button until the |
Scan icon and the |
privacy code |
number flashes. |
MODE 
button 
1.Press the MODE button until the Scan icon, Memory Location icon and memory location number flashes.
c)Press the MODE button to proceed to other functions.
If you do not press any button within 10 seconds, the radio will automatically
Vibrate Only |
Ring Only |
resume scanning memory locations.
2. Push the CHANNEL SELECT button up or |
down to change the ring setting. |
3.Push the CHANNEL SELECT button up or down and the unit will begin scanning privacy codes within the main channel you selected.
4.The radio will continue to scan privacy codes and stop if an incoming transmission is detected. The unit will remain on that code for 10 seconds. During that time you can:
a)Press and hold the TALK button and talk. The radio will remain on that channel and privacy code, then return to Standby mode.
b)Push the CHANNEL SELECT button up or down to resume scanning privacy codes.
2.Push the CHANNEL SELECT button up or down and the unit will begin scanning memory locations.
3.The radio will continue to scan all memory locations and stop if an incoming transmission is detected. The unit will remain on that location for 10 seconds. During that time you can:
a)Press and hold the TALK button and talk. The radio will remain on that memory
location channel and return to Standby mode.
(NOTE: If you want to reduce the number of memory locations being scanned you need to ”unprogram“ all unwanted locations by changing both the main channel and privacy code to 00. See Programming Memory Locations, page 9.)
Using Call Tones
and VibrAlert™
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently, or both. To change ring settings:
3. Press and release the ENTER button to enter |
the new setting, or press the MODE button |
to enter the new setting and proceed to |
other functions. |
Stop Watch
You can use the timekeeping capability of your microTALK® radio as a stopwatch, including the display of “split” times. To use the stop watch:
1.Press the MODE button until “Stop Watch” and 00:oo:oo are displayed in the LCD.
11 | 12 |
