Cobra Electronics XRS R7, XRS R9G manual Installation, Main Detector Unit MDU

Your Detector

Installation

Main Detector Unit (MDU)

1.Position MDU before actual mount.

• Do not attempt to adjust MDU bracket.

• Hold unit in place.

• Using non-permanent pen, mark two opposite corners.

2.Peel off film from two-piece fastener strips. Align with two corner markings made

in step 1. Press MDU bracket against windshield.

• Fastener strips cannot easily be removed. Strength of adhesive strips increases with time.

•Do not pull on MDU for first 20 minutes.

Nothing Comes Close to a Cobra® 7