Your Detector

Installation

Remote Display Unit (RDU)

Battery Installation

1.Turn RDU over and slide

battery cover off of RDU body.

2.Carefully plug battery wire connector into the battery connection port in RDU.

Connector only fits one way.

3. Replace battery cover.

Battery Charging

The unit is shipped with a sealed lithium-ion (LiON) battery pack that is rechargeable.

IMPORTANT: Avoid temperature extremes (hot and/or cold) to help prolong battery life and performance. DO NOT leave RDU exposed to direct sunlight. If the RDU is mounted on vent, clip must be on lower fin to avoid hot air blowing on RDU battery compartment.

NOTE: When battery begins to discharge too quickly, it is time to install a new battery.

10 English

Page 14
Image 14
Cobra Electronics XRS R9G, XRS R7 manual Remote Display Unit RDU Battery Installation, Battery Charging