Your Detector

Installation

Global Positioning System Locator (GPSL) (XRS Model R9G Only)

1.Position GPSL before actual mount.

Hold GPSL unit in place with USB cable connected to MDU.

Using non-permanent pen, mark two opposite corners.

2.Peel off film from two-piece fastener strips. Align with two corner markings made in step 1. Press GPSL bracket against windshield.

Fastener strips cannot easily be removed. Strength of adhesive strips increases with time.

Do not pull on GPSL for first 20 minutes.

SURFATHIS TOWARDSSKYCE

3.Connect cable between MDU and GPSL.

IMPORTANT: Proper side of GPSL module (“This Surface Toward Sky” wording embossed in unit case) must be against windshield and face sky.

Nothing Comes Close to a Cobra® 13

Page 17
Image 17
Cobra Electronics XRS R7, XRS R9G manual Global Positioning System Locator Gpsl XRS Model R9G Only