Page 10 Getting Started
English
Installing Batteries
The CAM3000 requires 4 x “AAA” 1.5V
batteries.
Slide the battery cover in the direction of 1.
the arrow to access the battery compart-
ment.
Load the four batteries, taking care to 2.
position the positive and negative ends
as shown.
Replace the battery cover.3.
The batteries used in this device may present a re
or chemical burn if m istreated. Do n ot disassem-
ble, incinerate, or heat the batteries.
Use only the size and type of batteries specied.
Do not mix old with new batteries, or mix dierent
types of batteries.
Do not charge batteries that are not intended to
be recharged. Follow th e battery manufacturer’s
directions.
Do not install the batteries with their polarities re-
versed; this may damage the unit.
If the unit will not be used for a long time, remove
the batteries to prevent damage or injury fro m
possible leakage.