Page 28 Troubleshooting
English
images are blurry or out of focus.
The camera may be moving of shaking when the
picture or video was recorded. Try steadying the
camcorder.
There may not be enough light to capture a steady
image. Try turning on more lights, or use the low-
light assist lamp.
Picture is not displayed on the lCD during
review.
If you are using a memory card from another camera ,
the image format may not be supported. The
CAM3000 supports PICT-format images o nly.
Recording was not saved to memory.
The camcorder may have turned o before the
recording was written and saved to memory. This
may have happened if the battery level is low. If the
“battery low” indicator appears on the LCD, replace
the batteries immediately.
the player has malfunctioned.
If the product suddenly has no response or powers o , an
electrostatic discharge may be the cause. If this happ ens,
please follow the steps below for recovery:
Remove the batteries and wait for 30 seconds.
Replace the batteries and turn the unit on again.