Getting Started

Connecting Power

Connect the HDR-700 to an AC 100-240V wall outlet to charge its internal battery or to operate the unit from AC power.

Plug one end of the supplied power adapter to the DC 12V Power Input Jack located on the rear of the unit. Plug the other end into an AC 100-240V wall outlet.

It will take approximately 8 hours to fully charge the internal battery.

The battery used in this device may present a fire or chemical burn if mistreated. Do not disassemble, incinerate, or heat the battery.

Do not connect this unit to a power source other than that which is indicated here or on the label as this may result in the risk of fire or electric shock.

Use only the AC adapter supplied. Failure to do so may cause a fire or damage the unit.

Upon initial use, the battery should be charged fully (~8 hours) to ensure optimal performance and bat- tery life.

www.cobyusa.com

Page 15

 

 

Page 15
Image 15
COBY electronic HDR-700 instruction manual Connecting Power