Samsung 2280HD manual Connecting TV Connecting Cable TV, Cable without a Cable Box

bottom of the rear panel.

2. Connecting TV - Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

1.Cable without a Cable Box

If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300Ω twin flat leads, follow the directions below.

1- Plug the incoming cable into the ANT 2 IN (CABLE)

1.terminal on the back of the TV.

zBecause this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

2.Connecting to a Cable Box that descrambles all Channels

2-1. Find the cable that is connected to the ANT OUT terminal on your cable box.

zThis terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".

2-2 Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.

3.Connecting to a Cable Box that descrambles some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a twoway splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)

3-1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box. This terminal might be labeled "ANT IN", "VHF IN" or simply, "IN".

3-2. Connect this cable to a two-way splitter.

3-3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.

3-4. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.