OTG backup
TRANSFERRING FILES FROM ANOTHER DEVICE
1.Connect the player's HOST jack using the supplied host cable (and another USB cable if necessary) to the other USB device (digital camera, MP3 player, etc.)
To the HOST Jack
To a UMS device
2. Enter the OTG backup mode.
Player
3.Select "YES" and press the joystick (OK button). The LCD will turn off and file transfer will begin.
4.When the transfer is complete, the LCD will turn back on, and a message will be displayed.
"Backup Failed" means that the transfer failed. Check the connection and the USB device. The USB device may need to be turned on.
"Backup Success" means the transfer completed successfully. The files are in the "Backup" folder.
SD Card
INSERTING THE SD CARD
1.Insert the SD card into the slot as shown below.
2.In the file browser, you will see "A:". This represents the SD card.
3.Press the SD card, and it will pop out. Make sure the SD card is not in use before ejecting it.
NOTE: The SD card must be formatted to the FAT file system. NTFS is not supported.
USING THE SD CARD
1.In the file browser select "A:", and press the joystick (OK button).
2.Select the file that you want to open, and press the joystick (OK button).
51 | 52 |
