Cognitive Solutions LXG-UG00000 Printer Settings, Select the Use Network Connection radio dial

HELPFUL TIP: PRINT

A SELF TEST TO

DETERMINE PRINTER’S CURRENT SETTINGS.

A SELF TEST CAN

BE PERFORMED BY HOLDING THE FEED BUTTON WHILE TURNING PRINTER POWER ON. CONTINUE TO HOLD THE FEED BUTTON UNTIL SELF TEST PRINTS.

NOTE: Using the parallel port connection with Administrator provides limited functionality due to the printer’s uni-directional communications on this port. Settings can be sent via Administrator, but they will not fill in on screen.

Serial Connection Parameters

•Baud Rate

•XON/XOFF

•Buffer Size

•Buffer Overflow

Connecting Via Ethernet

1.Select the Use Network Connection radio dial

2.Input the printer’s IP Address if static IP Address is to be used, otherwise, with

DHCP enabled, your server will assign an IP Address to the printer

3.Input the printer’s RTEL port number

Ethernet Connection Parameters

•IP Address

•Net Mask

•Gateway

•DHCP

•LPD

•RTEL

•RTEL Port

•Ethernet Text Buffer

Connecting Via Parallel

1.Select the Use Parallel Connection radio dial

2.Select the Parallel (LPT) Port to which the printer is connected

3.Click Connect

Printer Settings

Print Speed

The Print Speed value sets the printing speed of the printer.

•Low = 2 inches per second

•Normal = 2 inches per second

•High = 3 inches per second

15